PRODUCTSDIRECTION CONTROL VALVES (EXCEPT FOR DUAL VALVE)

Spool Operated Solenoid Valve (5-Port) (Sub-Base Type)

Model No. 524-_00

No air loss
Spool-integrated, low-sliding, soft sealing valve
Supports concentrated exhaust.
Sub-base type with DIN-connector connection
Compact with large flow rate

CAD Data

Standard specifications

Operating fluid		Compressed air filtered by a filter
Operating pressure range		0.2-1.0 MPa
Withstand pressure		1.5 MPa
Ambient temperature		5-50°C
Lubrication		Lubrication required (turbine oil ISO VG32 or equivalent)
Operation frequency		At least once a month, 3 Hz or less
Manual operations		Non-locking type manual push button
Vibration/shock resistance		3G/30G
Restriction on the installation direction		None
Ratings of the solenoid	Rated voltage	・AC 100 V 50/60 Hz, AC 110 V 60 Hz ・AC 200 V 50/60 Hz, AC 220 V 60 Hz ・DC 24 V
	Allowable voltage fluctuation rate	−10% to +10% of the rated voltage
	Insulation type	Type B

Current value of the solenoid

-	Voltage/frequency	50 Hz	60 Hz
Striking current	AC 100 V	0.065 A	0.058 A
Striking current	AC 200 V	0.035 A	0.032 A
Holding current	AC 100 V	0.040 A	0.033 A
Holding current	AC 200 V	0.022 A	0.019 A
Direct current	DC 24 V	0.085 A

Operating pressure and pilot pressure of the external pilot air supply method (optional)

Flow operation method	Operating pressure on the main valve side	Pilot pressure for operation
Two-position type Single solenoid Model No. 524-_00-11_ _	0-0.2 MPa	・When the pressure on the main valve side is 0 to 0.2 MPa: 0.2-0.3 MPa ・When the pressure on the main valve side is 0.2 MPa or more: Same pressure as on the main valve side
	0.2-1.0 MPa
Two-position type Double solenoid Model No. 524-_00-21_ _	0-0.15 MPa
	0.15-1.0 MPa
Three-position type Model No. 524-_00-_1_ _	0-0.2 MPa
	0.2-1.0 MPa

Typical characteristic values

Flow pattern	Pipe connection threads	Model No. (internal pilot air supply method, DIN)	Effective cross-sectional area (mm²)	Response time (msec)		Weight (kg)
Flow pattern	Pipe connection threads	Model No. (internal pilot air supply method, DIN)	Effective cross-sectional area (mm²)	ON	OFF	Weight (kg)
Two-position type Single solenoid	Rc1/4	524-200-1003	42	45	65	1.8
	Rc3/8	524-300-1003	68
	Rc1/2	524-400-1003	80
	Rc3/4	524-600-1003	80			1.9
Two-position type Double solenoid	Rc1/4	524-200-2003	42	26		2
	Rc3/8	524-300-2003	68
	Rc1/2	524-400-2003	80
	Rc3/4	524-600-2003	80			2.1
Three-position type Closed center	Rc1/4	524-200-3003	41	20	70	2.1
	Rc3/8	524-300-3003	60
	Rc1/2	524-400-3003	75
	Rc3/4	524-600-3003	75			2.2
Three-position type Exhaust center	Rc1/4	524-200-4003	41	20	70	2.1
	Rc3/8	524-300-4003	60
	Rc1/2	524-400-4003	75
	Rc3/4	524-600-4003	75			2.2
Three-position type Pressure center	Rc1/4	524-200-5003	41	20	70	2.1
	Rc3/8	524-300-5003	60
	Rc1/2	524-400-5003	75
	Rc3/4	524-600-5003	75			2.2

Model No.

524	-	0	0	0	-	1	0	0	0	DC 24 V
Product name		[1]	[2]			[3]	[4]	[5]	[6]	[7]

[1]Pipe connection threads

0	Without sub base
2	Rc1/4
3	Rc3/8
4	Rc1/2
6	Rc3/4

[2]Thread standard

0	Rc threads
G	G threads
N	NPT threads

[3]Number of positions and function

1	Two-position type, single solenoid
2	Two-position type, double solenoid
3	Three-position type, closed center
4	Three-position type, exhaust center
5	Three-position type, pressure center

[4]Pilot air supply method

0	Internal pilot air supply method
1	External pilot air supply method

[5]Accessories

0	Non-locking type push button
1	Locking type push button

[6]Electrical wiring

0	DIN-Pg 11 connector
2	DIN-Pg 11 connector with indicator lamp and surge killer
3	DIN-Pg 9 connector
4	DIN-Pg 9 connector with indicator lamp and surge killer

[7]Rated voltage

AC 100 V	AC 100 V 50/60 Hz, AC 110 V 60 Hz
AC 200 V	AC 200 V 50/60 Hz, AC 220 V 60 Hz
DC 24 V	DC 24 V

Notes:

If a voltage other than the above is required, specify the voltage and cycle.

Main precautions for use

[Basic]

Make sure to use the product within the specifications.

Use the product at the appropriate voltage and frequency.
Use the product at or below the maximum operating pressure.
Use the specified fluid (clean compressed air).
Do not use the product in a location where there is a risk of fire or explosion.

Do not use the product in atmosphere with corrosive gas, seawater, water, high humidity, or ozone.
When using the product in a low-temperature environment, treat water in the fluid using an air dryer or other device to prevent gelation.
Prevent interference accidents in operating equipment during an abrupt power shutdown or the subsequent restoration.

[Piping and installation]

Remove the port protection plug (or sealing) immediately before piping.
Use sufficiently flushed pipes.
Do not let seal materials enter the pipe during piping.
Properly install pipes, checking the display at each port.
Ensure space for maintenance around equipment.
Do not make the exhaust port smaller.
Install the silencer so that it will not come off.

[Electrical wiring]

Check the power supply voltage to confirm safety before wiring.
For a double solenoid model, prevent both solenoids from becoming live at the same time.

[Operation]

Confirm in advance that operating the manual button will not cause an accident due to the operation of equipment on the OUT side.
Make sure to return the locking type manual button to its original position after operating it.

[Maintenance]

Conduct daily and periodic inspections according to a plan.
Make sure to turn off the power and decrease the air pressure to 0 (zero) in equipment, and before and after it, before repair and overhaul.