PRODUCTSTANK PRESSURE REGULATION SYSTEM
Tank Pressure Regulation System
Model No. H3_-_ _1
- High-precision pressure setting, which improves the quality stability and yield of the product
- Easy-to-operate digital setting completed simply by pressing buttons.
- At-a-glance digital display
- Quick high-speed setting reduces setup time.
- Ideal for adjusting the pressure of balancer tanks in press machines and cushion tanks.
Standard specifications
| Operating fluid | Compressed air filtered by a filter (74 μm or less) | ||
| Operating pressure range on the IN side | 0.2-0.95 MPa | ||
| Set pressure range | 0.1-0.95 MPa | ||
| Minimum set pressure width | 0.01 | ||
| Set pressure precision | ±1% F.S. (@25°C) | ||
| Power supply voltage | Model H30-001-70_0 (controller) Model H3_-_ _1-07_0 (tank pressure regulation system) |
・AC 100 V | |
| Model H30-001-70_W (controller) Model H3_-_ _1-07_W (tank pressure regulation system) |
・AC 100 V (±10%) ・DC 24 V (±10%) |
||
| Model S12-201-1000 (P/I converter) | ・DC 24 V (±1 V) | ||
| GOOD signal output | ・DC 24 V (±10%) | ||
| Interlock signal output | ・DC 24 V (±10%) | ||
| Model H1_-_01-1000 (control valve) | ・AC 100 V ・DC 24 V |
||
| Controller-set pressure input | Model H30-001-70_ _ | BCD parallel or front shift key | |
| Ambient temperature | 5-50°C | ||
| Ambient relative humidity | RH20-85% (no condensation) | ||
| Vibration resistance | Make the controller vibration-resistant. | ||
| Weight | Controller | Model H30-001-70_ _ | 2.5 kg |
| P/I converter | Model S12-201-1000 | 0.4 kg | |
| Control valve | Model H18-801-1000 | 4 kg | |
| Model H1B-B01-1000 | 8.8 kg | ||
Notes:
- Ensure that the pressure does not exceed 0.95 MPa in the compressing process.
- Lubricate the control valve in a timely fashion. (ISO VG32 turbine oil is suitable.)
Model No. and typical characteristic values
| IN and OUT pipe connection threads | Air tank capacity (m³) | System | Components of the electronic tank pressure regulation system | |||
| Controller | Rated voltage | Control valve | P/I converter | |||
| Rc1 | 0.3-3 | H38-801-07A0 | H30-001-70A0 | AC 100 V* | H18-800-1000 (Pipe connection threads: Rc1) (EX pipe connection threads: Rc1 1/4) |
S12-201-0000 (Pipe connection threads: R1/4) |
| H38-801-07C0 | H30-001-70C0 | |||||
| H38-801-070W | H30-001-700W | AC 100 V DC 24 V |
||||
| H38-801-07BW | H30-001-70BW | |||||
| Rc1 1/2 | From 1.1 | H3B-B01-07A0 | H30-001-70A0 | AC 100 V* | H1B-B00-1000 (Pipe connection threads: Rc1 1/2) (EX pipe connection threads: Rc2) |
|
| H3B-B01-07C0 | H30-001-70C0 | |||||
| H3B-B01-070W | H30-001-700W | AC 100 V DC 24 V |
||||
| H3B-B01-07BW | H30-001-70BW | |||||
* Includes a built-in DC 24 V power supply for external equipment.
Notes:
- The allowable speed of filling and exhausting the air tank is 0.03 MPa/sec.
- When the air tank capacity is small, speed adjustment using the speed control valve or other device is required to reduce the air filling/exhausting speed.
- The speed control valve is not included as a component of the electronic tank pressure regulation system.
Request it separately if necessary.
Model No.
●Model No. H3_-_ _1 (tank pressure regulation system)
| H3 | 8 | - | 8 | 01 | - | 07 | 0 | W |
| Product name | [1] | [2] | [3] | [4] |
[1]Valve body size
| 8 | 1B |
| B | 1 1/2B |
[2]Pipe connection threads
| 8 | Rc1 |
| B | Rc1 1/2 |
[3]Accessories
| 0 | With cushion rubber |
| B | With bracket |
| A | Built-in DC power supply (Model No. H10-000 supported), with cushion rubber |
| C | Built-in DC power supply (Model No. H10-000 supported), with bracket |
Notes:
- Select A or C when you are using Model No. H10-000 (control box). A supply voltage of AC 100 V is supported.
[4]Rated voltage
| W | AC 100 V, DC 24 V |
| 0 | AC 100 V |
●Model No. H30-001 (controller)
| H30 | - | 001 | - | 70 | 0 | W |
| Product name | [1] | [2] |
[1]Accessories
| 0 | With cushion rubber |
| B | With bracket |
| A | Built-in DC power supply (Model No. H10-000 supported), with cushion rubber |
| C | Built-in DC power supply (Model No. H10-000 supported), with bracket |
| E | With bracket (installation pitch of the model H20-00_) |
Notes:
- Select A or C when you are using Model No. H10-000 (control box). A supply voltage of AC 100 V is supported.
- Select E when you are using Model No. H20-00_(control box).
[2]Rated voltage
| W | AC 100 V, DC 24 V |
| 0 | AC 100 V |
●Model No. H1_-_01 (control valve)
| H1 | 8 | - | 8 | 01 | - | 1000 |
| Product name | [1] | [2] |
[1]Valve body size
| 8 | 1B |
| B | 1 1/2B |
[2]Pipe connection threads
| 8 | Rc1 |
| B | Rc1 1/2 |
Model No. HS-4_ _Y2
- Reduces the setup time before replacing the press.
- Provides easy operations and reliable pressure adjustment.
- Reliably blocks the back pressure when the press operates.
- Retains the pressure in the tank even when the supply pressure is released.
Standard specifications
| Model No. | HS-404Y2 | HS-410Y2 | HS-412Y2 | HS-414Y2 | HS-420Y2 |
| Operating fluid | Air | ||||
| Maximum operating pressure on the primary side | 1.0 MPa | ||||
| Set pressure range | 0.1-1.0 MPa | ||||
| Minimum set pressure width | 0.01 MPa | ||||
| Set pressure precision | ±1% F.S. | ||||
| Rated voltage | AC 100 V 50/60 Hz | ||||
| Allowable voltage fluctuation rate | ±10% | ||||
| Power consumption | 95 VA | ||||
| Allowable back pressure | 1.0 MPa | ||||
| Pipe connection threads | Rc1/2 | Rc1 | Rc1 1/4 | Rc1 1/2 | Rc2 |
| Exhaust port | - | Rc1 | Rc1 1/2 | Rc2 | |
| Ambient temperature | 5-60°C | ||||
| Weight | 3.5 kg | 7.0 kg | 13.0 kg | ||
Notes:
- The setting precision of ±1% F.S. assumes an ambient temperature of 22°C.
At other temperatures, the precision may change from the above value by up to 0.05% F.S./°C. - A silencer is included (except for Model No. HS-404Y2).
Note that the silencer is separately packaged and not installed in the product. - Tank pressure regulation controllers require a pilot regulator.
Select from the models NRV-802, R42-201, and NRV-3_ _.