azbil

HOME > TOP > PRODUCT INFORMATION > CPL MICRONLUB LUBRICATION UNITS > CPL MICRONLUB Accessories

CPL MICRONLUB Accessories

Model No. D/H/J□□□□

Model No. D/H/J□□□□
  • For Model No. MC9-01□□, there are three types of accessories available on the IN side:
    1.   Filter/Regulator with solenoid valve
    2.   Regulator with solenoid valve
    3.   Solenoid valve regulator + oil mist separator
  • These accessories can be connected to the MC9-01□□
    without using nipples or other fittings.
図面CADデータ

MODEL NO.

Product Name DP5 11 A
[1] [2] [3]

[1]Types of IN-Side Equipment

DP5 Filter/Regulator with solenoid valve
（5μm、Polycarbonate bowl, automatic drain）
DM5 Filter/Regulator with solenoid valve
（5μm、Metal bowl, automatic drain）
DP3 Filter/Regulator with solenoid valve
（0.3μm、Polycarbonate bowl, automatic drain）
DM3 Filter/Regulator with solenoid valve
（0.3μm、Metal bowl, automatic drain）
H00 Regulator with solenoid valve
J00 Regulator with solenoid valve, and oil mist separator

[2]Rated Voltage of Solenoid Valve

11 AC100V 50/60Hz
12 AC200V 50/60Hz
33 DC24V

[3]Connection Target

A For use without control circuit
C For use with control circuit

※ The rated voltage of the solenoid valve for use with the control circuit is DC 24V only.

※ A pressure gauge (to display operating pressure) is included.

※ The filter/regulator with solenoid valve does not include functions for water or oil removal.
（Compressed air quality class 3:-:-）。
 Please add additional adjustment equipment according to the usage environment of the lubrication system.
 We offer oil mist separators with a compressed air quality class of 1:-:2.

Model No. PB4-□□□

Model No. PB4-□□□
  • This is a convenient manifold fitting designed for branching micron fog
    from the main manifold line to individual fog nozzle sections.
  • Micron fog can be extracted from each face of the prismatic manifold allowing for easy distribution and piping to the desired location.
図面CADデータ

SPECIFICATIONS

Maximum distributed airflow rate 500dm³/min（ANR）
IN Port（Main line side） Rc1/2

MODEL NO./REPRESENTATIVE CHARACTERISTICS

Model No. IN Port OUT Port Number of OUT Ports
PB4-1J0 Rc1/2 Rc1/8 18
PB4-1G0 Rc1/8 16
PB4-2G0 Rc1/4
PB4-261 Rc1/4 6
PB4-320 Rc3/8 2

Model No. 2A2×□

Model No. 2A2×□
  • The micron fog supply line can be switched according to
    the machine's operating process.
  • Fog supply to the machine units can be stopped during idle periods, reducing air consumption.
  • The valve passage is a straight-through design
    that does not disturb the flow of micron fog.
  • Valves can be stacked (in series) according to
    the machine's operating pattern.
  • Operating pressure range：0.1 ～ 0.5MPa
    Orifice diameter：Ø6mm
    Rated voltage：AC100V/AC200V（50/60Hz）、DC24V
図面CADデータ

MODEL NO.

2A2 × 2 - 3 AC100V
Product Name [1] [2] [3]

[1]Serial number

2 2
3 3
4 4
5 2

[2]Valve sequence indicator

3 External pilot, NC type
（Single unit model 2A2-200-0104）

[3]Rated Voltage

AC100V AC100V 50/60Hz
AC200V AC200V 50/60Hz
DC24V DC24V

Model no. S20-TQ2

Model No. S20-TQ2
  • The flow of micron fog can be clearly monitored with an LED bar display.
  • The reliability of the CPL MICRONLUB lubrication system
    is further enhanced.
  • The bar display LED can be clearly seen even from a distance.
  • Sensitivity adjustment is simple -just move the threshold LED.

SPECIFICATIONS

Operating Fluid Clean air mixed with micron fog (mist)*1
Operating Pressure Max.0.7MPa
Pressure Resistance 1.0MPa
Ambient Temperature 5 ～ 50℃
Power Supply Voltage DC24V
Power Consumption Max.100A
Output NPN or PNP open collector、max. 100A/DC48V
（NPN and PNP outputs can be selected via electrical wiring）
Indicator Light Orange LED（Power indicator）、Green LED（Fog ON indicator）
Yellow LED（Set threshold value）、Green LED（Fog detection bar display）
Protection Rating Equivalent to IP54
Electrical Connection Please use a dedicated connector cable
Fluid Tube Outer diameter 8 mm, black, for pneumatic use

*1.   Micron fog of oil types with a low atomization rate may not be detectable.
Additionally, if the fog flows continuously without interruption or if there is no variation in the transmission of the detection light, output may not be possible.

MODEL NO.

S20 - TQ2 - 0 0 0 0
Product Name [1] [2]

[1]Control Output

0 NPN, PNP compatible output (4-wire)
1 NPN output (3-wire)

[2]Cable Included

0 Nil
1 Dedicated connector cable included length：3m
2 Dedicated connector cable included length：5m

Model No. NT□-□01

Model No. NT□-□01
  • It converts dry micron fog into fog with particle sizes suitable
    for lubrication.
  • It can be screwed into the lubrication ports of direct-acting units,
    ball screws, gearboxes, bearings, and other components（Three types of thread sizes are available: M6×0.75, M6×1, and R1/8）.
  • A variety of nozzle sizes are available to accommodate
    different lubrication targets.
図面CADデータ

DIMENSIONS

Dimensions
Model No. Straight Type L Type
A B C D E F
Model No. NTM-M01/P01 16 8 10 18 10 10
Model No. NTM-101 14 5 10 19 10 10
Model No. NT1-M01/P01 18 10 12 20 12 12
Model No. NT1-101 20 11 12 23 14 14

MODEL NO.

NT M - M 01 - 0 0 07
Product Name [1] [2] [3] [4]

[1]Manifold Side Connection Thread

M M5（Internal thread）
1 Rc1/8（Internal thread）

[2]Nozzle Side Connection Thread (Lubrication Port)

M M6×0.75（External thread）
P M6（External thread）
1 R1/8（External thread）

[3]Shape

0 Straight type
1 L type

[4]Nozzle Diameter

07 Ø0.7mm
10 Ø1.0mm
12 Ø1.2mm
16 Ø1.6mm
20 Ø2.0mm*
24 Ø2.4mm*

* Nozzle diameters of Ø2.0 mm and Ø2.4 mm are only applicable to Model No. NT1-□01.

©2000- Azbil TA Co., Ltd. All rights reserved.