SPECIFICATIONS
FLUID | Filtered Compressed Air |
OPERATING PRESSURE | max. 1.0MPa |
AMBIENT TEMPERATURE | 5 ~ 60°C |
OPERATION | Micron Fog Lubrication |
RECOMMENDED LUBRICANT | Turbine Oil ISO VG 32 or equivalent for mist lubrication |
SPECIFICATIONS
Model Numbers | NOL-802-1XLFG21R | NOL-802-2XLFG21R | NOL-804-5XLFG21R | NOL-802-2XLFG21 |
Lubrication Capacity | 8 ~ 32BI | 20 ~ 100BI | ||
Pipe Sizes | Rc 1/4 | Rc 1/2 | ||
Operating Fluid | Oil removed clean compressed air | |||
Operating Pressure | 0.04 ~ 0.2MPa | |||
Lubricating Oil | Oil for mist lubrication, and ISO VG100 maximum oil viscosity | |||
Reservoir Capacity (Effective) | 0.6dm³ | 1.4dm³ | 4.2dm³ | 8.4dm³ |
Air Consumption | 70dm³/min(ANR) | 80dm³/min(ANR) | ||
Ambient Tepm. | 5 ~ 50°C | |||
Oil Level Switch | makes contact at lower oil level, capacity: 0.5A/AC 100v (resistance load) | |||
Mass (about) | 5kg | 8kg | 15kg | 25kg |
Note:
* Lubricating oil should be suitable for the mist lubrication.
* Air consumption in the table is in the case at 0.2MPa operation pressure. Air consumption changes with Manifold pressure and the number of Fog-nozzles (=reclassifiers).
* Use these lubricator units within specifications.
SPECIFICATIONS
FLUID | Pressurizing Fluid: Filtered Compressed Air Pressurized Fluid: Oil, Cutting Oil, etc. |
OPERATING PRESSURE | max. 1.0MPa |
AMBIENT TEMPERATURE | 5 ~ 60°C |
PIPE SIZE | Pressure Air Inlet Port :Rc 1/4 Oil Outlet Port :Rc 1/4 |
BASIC MODEL NOs. & OTHERS
Pipe Size |
MODEL NUMBER | Oil Reservoir (liter) |
Mass (kg) |
Rc 1/4 | OT-1002YXL | 1 | 5 |
OT-2002YXL | 2 | 8 | |
OT-5002YXL | 5 | 15 | |
OT-9002YXL | 9 | 24 |
EQUIPMENT COMPOSING
SPRAY SYSTEM
● AIR FILTER
・ Rc1/4
・ Automatic drain type
・ 5 μm filter element
● AIR REGULATOR
・ Rc1/4
・ Adjusting Pressure Range
0.02 ~ 0.8MPa
・ Relieving type
SPECIFICATIONS
FLUID | Filtered Compressed Air |
OPERATING PRESSURE | 0.03 ~ 1.0MPa |
AMBIENT TEMPERATURE | 5 ~ 60°C |
PIPE SIZE | Rc 1/4(Air & Liquid port) |
RECOMMENDED LUBRICANT | Machinery Lubricant, Weak Alkaline Water Solution Emulsion, Vegetable Cutting Lubricant |
OUTPUT OIL AMOUNT | 1 ~ 15cc/min. Operating Lubricant: Turbine Oil VG 32 Oil Temperature: 15°C Air Line: 0.1MPa Oil Line: 0.14MPa |
● 2 PORT SOLENOID VALVE
Pipe Size | MODEL NUMBER | Effective Area |
Rc 1/4 | MVS-2202Y | 35mm² |
Rc 3/8 | MVS-2203Y | 40mm² |
Rc 1/2 | MVS-2204JY | 40mm² |
● CONTROL VALVE
Pipe Size | Nozzle | Remarks |
SLC-1-500 | Fan type | Type with concentric tubing |
SLC-2-500 | Conical type | |
SLC-1-0 | Fan type | Directly fixed type |
SLC-2-0 | Conical type | |
SLC-101-616 | Female fitting (Rc1/8) |
Type for tube joint |
SLC-102-616 | Female fitting (Rc1/4) |
SPECIFICATIONS
MODEL NUMBER | TLC-※※04 | TLB-※00-50B※ |
FLUID | Filtered Compressed Air (filtered air with 74μm element) |
|
MAX. INLET PRESSURE | 1.0MPa | |
OUTLET PRESSURE RANGE | 0.1 ~ 0.7MPa | 0.1 ~ 0.95MPa |
AMBIENT TEMPERATURE | 5 ~ 60°C | |
RELIEF | Non relieving | |
RECOMMENDED VISCOSITY RANGE FOR OIL |
ISO VG 32 ~ 38 (Turbine Oil or equivalent for mist lubrication) |
|
MAX. OIL OUTPUT | 25cc/h |
SPECIFICATIONS & MODEL NUMBERS
MODEL NUMBER | TLD-S104 | TLD-S204 |
PIPE SIZE | Air Supply Port: Rc 1/4 Micron Fog Outlet Port: Rc 1/2 |
|
FLUID | Compressed Air (Cleaned and filtered with 74 micron element. Clean air filtered by 25 micron air filter is needed for pressurizing line.) |
|
OPERATING PRESSURE RANGE | 0.3 ~ 0.8MPa | |
RECOMMENDED OIL | ISO VG 32 Turbine oil or equivalent for mist lubrication | |
MAX. OIL OUTPUT | 22cc/h | |
MASS(kg) | 25 | |
RATED VOLTAGE | AC-100V 50/60Hz, 110V 60Hz |
AC-200V 50/60Hz, 220V 60Hz |
VOLTAGE ALLOWANCE | –15 ~ +10% | |
INSULATION GRADE | Class “B” |
SPECIFICATIONS
PIPE SIZE | Air Supply Port : Rc 1/4 Micron Fog Outlet Port : Rc 1/2 |
FLUID | Compressed Air (Cleaned and filtered wirh 74 micron element) |
OPERATING PRESSURE RANGE | 0.3 ~ 0.8MPa |
RECOMMENDED OIL | ISO VG32 Turbine oil or equivalent for mist lubrication |
MAX. OIL OUTPUT | 22cc/hour |
MASS | |
RATED VOLTAGE | AC-100V 50/60Hz, 110V 60Hz AC-200V 50/60Hz, 220V 60Hz |
VOLTAGE ALLOWANCE | –15 ~ +10% |
Note: Following by-pass adaptor must be prepared separately by user.
MAIN AIR LINE SIZE | MODEL NUMBER |
1B | NBA-712* |
1 1/4B | NBA-712 |
1 1/2B | NBA-714 |
2B | NBA-720 |
* Use 1 1/4 x 1 B bushing
SPECIFICATIONS
PIPE SIZE | Air Supply Port : Rc 1/2 Micron Fog Outlet Port : Rc 1/2 |
FLUID | Compressed Air (Cleaned and filtered wirh 25 micron element) |
OPERATING PRESSURE | 0.2 ~ 0.5MPa |
RECOMMENDED OIL | ISO VG32 Turbine oil or equivalent for mist lubrication |
RESERVOIR CAPACITY | 9 Liter |
MASS(kg) | 60 |
Note: Following main air filter and by-pass adaptor must be prepared separately by user.
MAIN LINE PIPE SIZE | MAIN AIR FILTER | BY-PASS ADAPTOR |
1B | NAF-610 | NBA-712* |
1 1/4B | NAF-512XL | NBA-712 |
1 1/2B | NAF-514XL | NBA-714 |
2B | NAF-520XL | NBA-720 |
* Use 1 1/4 x 1 B bushing